• FrankLike (5/5) Jan 13 2018 Hi,everyone,
• Jonathan M Davis (11/16) Jan 13 2018 Well, I'm not quite sure what you mean, but if you mean that you want to
• FrankLike (5/6) Jan 13 2018 Such as byte[] byteData =[0,0,0,8];
• FrankLike (4/7) Jan 13 2018 Sorry,Such as byte[] byteData =[8,0,0,0];
• Jonathan M Davis (25/30) Jan 13 2018 I'd suggest looking at
• FrankLike (4/9) Jan 13 2018 I get the result "1000" from byte[] byteData =[0,0,0,8];
• FrankLike (3/12) Jan 13 2018 I get the result "1000" from ubyte[] byteData =[0,0,0,8];
• Jonathan M Davis (8/20) Jan 13 2018 Good to hear.
• FrankLike (3/13) Jan 13 2018 Thank you.

FrankLike <1150015857 qq.com> writes:

Hi,everyone,
     I need some help on 'Number Convert module' in D,such as 
byte[] type to  BinaryDigit.
Where can get the module?

Thanks.

Jonathan M Davis <newsgroup.d jmdavisprog.com> writes:

On Sunday, January 14, 2018 01:45:37 FrankLike via Digitalmars-d-learn 
wrote:
 Hi,everyone,
      I need some help on 'Number Convert module' in D,such as
 byte[] type to  BinaryDigit.
 Where can get the module?

 Thanks.

Well, I'm not quite sure what you mean, but if you mean that you want to
take a ubyte[] and do something like take arr[0 .. 4] and convert that to
int, then you should check out

https://dlang.org/phobos/std_bitmanip.html

In particular,

https://dlang.org/phobos/std_bitmanip.html#bigEndianToNative
https://dlang.org/phobos/std_bitmanip.html#peek
https://dlang.org/phobos/std_bitmanip.html#read

- Jonathan M Davis

FrankLike <1150015857 qq.com> writes:

On Sunday, 14 January 2018 at 02:03:39 UTC, Jonathan M Davis 
wrote:

 Well, I'm not quite sure what you mean, but if you mean that

Such as byte[] byteData =[0,0,0,8];
to convert, at last,get the string bit :"100".or get the BitArray.

Thanks.

FrankLike <1150015857 qq.com> writes:

On Sunday, 14 January 2018 at 02:41:39 UTC, FrankLike wrote:
 On Sunday, 14 January 2018 at 02:03:39 UTC, Jonathan M Davis 
 wrote:

 Well, I'm not quite sure what you mean, but if you mean that


Sorry,Such as byte[] byteData =[8,0,0,0];
to convert, at last,get the string bit :"100".or get the BitArray.

Thanks.

Jonathan M Davis <newsgroup.d jmdavisprog.com> writes:

On Sunday, January 14, 2018 02:41:39 FrankLike via Digitalmars-d-learn 
wrote:
 On Sunday, 14 January 2018 at 02:03:39 UTC, Jonathan M Davis

 wrote:
 Well, I'm not quite sure what you mean, but if you mean that

 Such as byte[] byteData =[0,0,0,8];
 to convert, at last,get the string bit :"100".or get the BitArray.

I'd suggest looking at

https://dlang.org/phobos/std_bitmanip.html#bitsSet

and

https://dlang.org/phobos/std_bitmanip.html#BitArray

I'm not sure that either of them does quite what you want, but you may be
able to use them to get what you want.

Alternatively, you can convert to and from string using a radix with
std.conv.to - e.g.

assert(to!string(42, 2) == "101010");
assert(to!int("101010", 2) == 42);

You have to already have convered the array of ubytes to an integral value
to do that, but you can get the base-2 representation of a number that way.
And one of these could be used to convert the array of ubytes to an
integral:

https://dlang.org/phobos/std_bitmanip.html#bigEndianToNative
https://dlang.org/phobos/std_bitmanip.html#littleEndianToNative
https://dlang.org/phobos/std_bitmanip.html#peek
https://dlang.org/phobos/std_bitmanip.html#read

The only ways in Phobos that I'm aware of to get a number in binary format
as a string would be to use std.conv.to or std.conv.parse with a radix or to
use toString on BitArray. So, if that's your ultimate goal, you'll need to
figure out how to use one of those to get there.

- Jonathan M Davis

FrankLike <1150015857 qq.com> writes:

On Sunday, 14 January 2018 at 03:09:40 UTC, Jonathan M Davis 
wrote:
 On Sunday, January 14, 2018 02:41:39 FrankLike via 
 Digitalmars-d-learn wrote:
 [...]

 I'd suggest looking at

 [...]

I get the result "1000" from  byte[] byteData =[0,0,0,8];

Thank you very much.

FrankLike <1150015857 qq.com> writes:

On Sunday, 14 January 2018 at 03:28:28 UTC, FrankLike wrote:
 On Sunday, 14 January 2018 at 03:09:40 UTC, Jonathan M Davis 
 wrote:
 On Sunday, January 14, 2018 02:41:39 FrankLike via 
 Digitalmars-d-learn wrote:
 [...]

 I'd suggest looking at

 [...]


  I get the result "1000" from  ubyte[] byteData =[0,0,0,8];

  Thank you very much.

Jonathan M Davis <newsgroup.d jmdavisprog.com> writes:

On Sunday, January 14, 2018 03:28:28 FrankLike via Digitalmars-d-learn 
wrote:
 On Sunday, 14 January 2018 at 03:09:40 UTC, Jonathan M Davis

 wrote:
 On Sunday, January 14, 2018 02:41:39 FrankLike via

 Digitalmars-d-learn wrote:
 [...]

 I'd suggest looking at

 [...]

 I get the result "1000" from  byte[] byteData =[0,0,0,8];

 Thank you very much.

Good to hear.

On a side note, I would point out that you almost certainly want to be using
ubyte and not byte. byte is signed, whereas ubyte is unsigned. So, if you
want to represent bytes of memory rather than an integral value between 1
and 127, then you want ubyte.

- Jonathan M Davis

FrankLike <1150015857 qq.com> writes:

On Sunday, 14 January 2018 at 03:49:05 UTC, Jonathan M Davis 
wrote:

 I get the result "1000" from  byte[] byteData =[0,0,0,8];

 Thank you very much.

 Good to hear.

 On a side note, I would point out that you almost certainly 
 want to be using ubyte and not byte. byte is signed, whereas 
 ubyte is unsigned. So, if you want to represent bytes of memory 
 rather than an integral value between 1 and 127, then you want 
 ubyte.

 - Jonathan M Davis

Thank you.