• Chris R. Miller (24/24) May 19 2008 It's a little bit of a throwback to be going back to DMD 1.028, but I=20
• Jacob Carlborg (6/38) May 20 2008 When I try to download the zip file it says "Invalid/empty data or
• Chris R. Miller (3/42) May 20 2008 Yes, I do that normally, however, the software randomly decided to not d...

"Chris R. Miller" <lordSaurontheGreat gmail.com> writes:

It's a little bit of a throwback to be going back to DMD 1.028, but I=20
figure that having something stable is better than having something=20

causing some issues with DWT.

This is a big update, giving a debugger, DDL, and Arclib to the 0.4.x=20
line.  Also, given that I was having some troubles with DWT's new 3.4m7=20
line, I opted to hold at revision 212 for DWT in order to give it a=20
little bit longer to stabilize just a bit more.

DDBI, however, got kicked out because in the changes to the logging=20
system in Tango caused DDBI to no longer compile.  When that gets fixed=20
I'll add it right back.  I just didn't want to hold this release any=20
longer, since there are a lot of good additions here that I wanted to=20
see with a stable compiler.

For those of you without administrator access to your computer, I also=20
wrote a small batch file which temporarily changes the path variable for =

you, and then starts a command line.  That way you can get away without=20
having to mangle your path permanently.

I also tried compressing it with 7Zip, so you have the option of having=20
five fewer megabytes to download if you wish.  Not everyone has 7z, so I =

also made a normal zipfile.

As always, feel free to make any suggestions and I'll see what I can do. =

  You can download from my site here:

http://tinyurl.com/6qmhzf

Hope you find it useful!

Jacob Carlborg <doobnet gmail.com> writes:

Chris R. Miller wrote:
 It's a little bit of a throwback to be going back to DMD 1.028, but I 
 figure that having something stable is better than having something 

 causing some issues with DWT.
 
 This is a big update, giving a debugger, DDL, and Arclib to the 0.4.x 
 line.  Also, given that I was having some troubles with DWT's new 3.4m7 
 line, I opted to hold at revision 212 for DWT in order to give it a 
 little bit longer to stabilize just a bit more.
 
 DDBI, however, got kicked out because in the changes to the logging 
 system in Tango caused DDBI to no longer compile.  When that gets fixed 
 I'll add it right back.  I just didn't want to hold this release any 
 longer, since there are a lot of good additions here that I wanted to 
 see with a stable compiler.
 
 For those of you without administrator access to your computer, I also 
 wrote a small batch file which temporarily changes the path variable for 
 you, and then starts a command line.  That way you can get away without 
 having to mangle your path permanently.
 
 I also tried compressing it with 7Zip, so you have the option of having 
 five fewer megabytes to download if you wish.  Not everyone has 7z, so I 
 also made a normal zipfile.
 
 As always, feel free to make any suggestions and I'll see what I can do. 
  You can download from my site here:
 
 http://tinyurl.com/6qmhzf
 
 Hope you find it useful!
 

When I try to download the zip file it says "Invalid/empty data or 
corrupted file"

It would be nice if you put some information about what the package 
contains on the website with every release, the containing packages and 
the version of the packages for example.

Chris R. Miller <lordSaurontheGreat gmail.com> writes:

Jacob Carlborg Wrote:

 Chris R. Miller wrote:
 It's a little bit of a throwback to be going back to DMD 1.028, but I 
 figure that having something stable is better than having something 

 causing some issues with DWT.
 
 This is a big update, giving a debugger, DDL, and Arclib to the 0.4.x 
 line.  Also, given that I was having some troubles with DWT's new 3.4m7 
 line, I opted to hold at revision 212 for DWT in order to give it a 
 little bit longer to stabilize just a bit more.
 
 DDBI, however, got kicked out because in the changes to the logging 
 system in Tango caused DDBI to no longer compile.  When that gets fixed 
 I'll add it right back.  I just didn't want to hold this release any 
 longer, since there are a lot of good additions here that I wanted to 
 see with a stable compiler.
 
 For those of you without administrator access to your computer, I also 
 wrote a small batch file which temporarily changes the path variable for 
 you, and then starts a command line.  That way you can get away without 
 having to mangle your path permanently.
 
 I also tried compressing it with 7Zip, so you have the option of having 
 five fewer megabytes to download if you wish.  Not everyone has 7z, so I 
 also made a normal zipfile.
 
 As always, feel free to make any suggestions and I'll see what I can do. 
  You can download from my site here:
 
 http://tinyurl.com/6qmhzf
 
 Hope you find it useful!
 

 
 When I try to download the zip file it says "Invalid/empty data or 
 corrupted file"

Just fixed that, thanks for pointing it out.  For some odd reason it didn't
copy a file...  that's strange, I'll have to remember to check for that before
announcing in the future.

 It would be nice if you put some information about what the package 
 contains on the website with every release, the containing packages and 
 the version of the packages for example.

Yes, I do that normally, however, the software randomly decided to not display
that information even when I put it there.  I was far too tired to try and fix
that last night, but I just finished doing that, so there should be something
there now.