www.digitalmars.com         C & C++   DMDScript  

c++ - How do I suppress the creation of a map file?

reply "Matthew Wilson" <dmd synesis.com.au> writes:

Apr 07 2003
parent reply Arjan Knepper <ask me.to> writes:
/NOMAP

Matthew Wilson wrote:
Apr 07 2003
next sibling parent "Matthew Wilson" <dmd synesis.com.au> writes:
Brilliant.

Doh!

Thanks

:)

"Arjan Knepper" <ask me.to> wrote in message
news:b6r8lm$12jo$1 digitaldaemon.com...
 /NOMAP

 Matthew Wilson wrote:
Apr 07 2003
prev sibling parent reply "Matthew Wilson" <dmd synesis.com.au> writes:
That works nicely.

For the benefit of others, when linking via DMC++, one needs to specify

-L/nomap

Thanks again Arjan

"Arjan Knepper" <ask me.to> wrote in message
news:b6r8lm$12jo$1 digitaldaemon.com...
 /NOMAP

 Matthew Wilson wrote:
Apr 07 2003
parent reply "Matthew Wilson" <dmd synesis.com.au> writes:
I spoke too soon. The linker command does seem to accept the flag, and the
"/nomap" sequence is included in the link command.

Alas, map files are still build. Very annoying!

"Matthew Wilson" <dmd synesis.com.au> wrote in message
news:b6s1vt$1joq$1 digitaldaemon.com...
 That works nicely.

 For the benefit of others, when linking via DMC++, one needs to specify

 -L/nomap

 Thanks again Arjan

 "Arjan Knepper" <ask me.to> wrote in message
 news:b6r8lm$12jo$1 digitaldaemon.com...
 /NOMAP

 Matthew Wilson wrote:
Apr 07 2003
parent reply Arjan Knepper <ask me.to> writes:
Typical, using link.exe /NOMAP test.obj does not generate a .map using
dmc -L/NOMAP test.cpp _does_ generate a .map. Strange...

Using the IDDE, the command in the outputwindow looks like:
link /NOI /DE /E /PACKF /XN /NT /ENTRY:WinMainCRTStartup /BAS:4194304
/A:512 /RC   :.\XMS.RES  XMS.LNK
ren U:\TEST\XMS\REC\$SCW$.EXE XMS.EXE
Errors: 0  Warnings: 0
Successful build

And no map file is generated.

Matthew Wilson wrote:
 I spoke too soon. The linker command does seem to accept the flag, and the
 "/nomap" sequence is included in the link command.
 
 Alas, map files are still build. Very annoying!
 
 "Matthew Wilson" <dmd synesis.com.au> wrote in message
 news:b6s1vt$1joq$1 digitaldaemon.com...
 
That works nicely.

For the benefit of others, when linking via DMC++, one needs to specify

-L/nomap

Thanks again Arjan

"Arjan Knepper" <ask me.to> wrote in message
news:b6r8lm$12jo$1 digitaldaemon.com...

/NOMAP

Matthew Wilson wrote:
Apr 07 2003
parent reply "Matthew Wilson" <dmd synesis.com.au> writes:
Thanks for the info. I'll try and change the makefile to use LINK and not
DMC

"Arjan Knepper" <ask me.to> wrote in message
news:b6s5vt$16e$1 digitaldaemon.com...
 Typical, using link.exe /NOMAP test.obj does not generate a .map using
 dmc -L/NOMAP test.cpp _does_ generate a .map. Strange...

 Using the IDDE, the command in the outputwindow looks like:
 link /NOI /DE /E /PACKF /XN /NT /ENTRY:WinMainCRTStartup /BAS:4194304
 /A:512 /RC   :.\XMS.RES  XMS.LNK
 ren U:\TEST\XMS\REC\$SCW$.EXE XMS.EXE
 Errors: 0  Warnings: 0
 Successful build

 And no map file is generated.

 Matthew Wilson wrote:
 I spoke too soon. The linker command does seem to accept the flag, and
the
 "/nomap" sequence is included in the link command.

 Alas, map files are still build. Very annoying!

 "Matthew Wilson" <dmd synesis.com.au> wrote in message
 news:b6s1vt$1joq$1 digitaldaemon.com...

That works nicely.

For the benefit of others, when linking via DMC++, one needs to specify

-L/nomap

Thanks again Arjan

"Arjan Knepper" <ask me.to> wrote in message
news:b6r8lm$12jo$1 digitaldaemon.com...

/NOMAP

Matthew Wilson wrote:
Apr 07 2003
parent reply "Jim Jennings" <jwjenn mindspring.com> writes:
"Matthew Wilson" <dmd synesis.com.au> wrote in message
news:b6srvg$jhb$1 digitaldaemon.com...
 Thanks for the info. I'll try and change the makefile to use LINK and not
 DMC
I'd be interested in knowing what you have in your makefile. I have tried the following. The commented lines at the end work, and there is no map file remaining. I am not sure that I can do what I am trying to do with the code as it stands (or if I even have it right). I write a lot of little one file programs and would like to eliminate the leftover map file. One can always delete the map file as an extra step either from the command line for with a makefile command, but it is a pain. I forget and end up with a lot of trash sitting around. DMDIR=C:\dm\bin CC=$(DMDIR)\dmc CFLAGS=-Ae -C -WA -S -5 -a8 INCLUDES=-I\dm\stlport\stlport LINKER=$(DMDIR)\link LFLAGS=/NOI /DE /E /PACKF /XN /NT .SUFFIXES: .c .cpp .h .hpp .obj .exe .cpp.obj: $(CC) -c $? $(CFLAGS) $(INCLUDES) obj.exe: $(LINKER) $(LFLAGS) -o $? #strsiz.obj: strsiz.cpp #strsiz.exe: strsiz.obj sc strsiz.cpp Fatal error: unable to open input file 'iostream' --- errorlevel 1
Apr 07 2003
parent "Jim Jennings" <jwjenn mindspring.com> writes:
"Jim Jennings" <jwjenn mindspring.com> wrote in message
news:b6tbuv$uvf$1 digitaldaemon.com...
 "Matthew Wilson" <dmd synesis.com.au> wrote in message
 news:b6srvg$jhb$1 digitaldaemon.com...
 Thanks for the info. I'll try and change the makefile to use LINK and
not
 DMC
I'd be interested in knowing what you have in your makefile. I have tried the following. The commented lines at the end work, and there is no map
file
 remaining. I am not sure that I can do what I am trying to do with the
code
 as it stands (or if I even have it right). I write a lot of little one
file
 programs and would like to eliminate the leftover map file. One can always
 delete the map file as an extra step either from the command line for with
a
 makefile command, but it is a pain. I forget and end up with a lot of
trash
 sitting around.
This works so I will go with it until I know more about make. .cpp.obj: $(CC) -c $? $(CFLAGS) $(INCLUDES) strsiz.exe: strsiz.obj $(LINKER) $(LFLAGS) $<
Apr 07 2003